|
| |
TM 10-4930-241-13
2-18. OPERATING PROCEDURES - CONT.
(5)
Refuel Mode - Bottom Loading Points Distribution. Refer to figure 2-35.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
NOTES
•
Handle on 4-inch ball valves may be opened to allow fuel to one
or two tankers at the same time. Open handles as needed to
support your mission.
•
Refer to para 2-18g (4) for operating procedures for refuel mode.
•
Ensure vehicle/equipment is properly grounded.
(a) Connect 4-inch ball valve (1) to tanker/equipment being refueled.
(b) Open valves (2 and 3).
(c) When tank equipment is full, close valves (2 and 3) and disconnect 4-inch ball valve
(1).
(d) When fueling operation is completed, shutdown 600 GPM pump.
(e) Close all valves.
Figure 2-35. Refuel Mode - Bottom Loading Points Distribution.
2-82
|
