|
| |
Installation.
TM 10-4930-238-12&P
Figure 4–21. Water Detector Adapter, Disassembly/Reassembly.
f. R e a s s embly.
(1)
Refer to Figure 4-21 and apply sealing compound to threads of coupling halves and install cou-
pling half (9) and coupling half (8) on nipple (10).
(2) Apply sealing compound to threads and
(3)
Install new gasket (6) and dust cap (5).
(4)
Install new gasket (3) and dust plug (2).
g.
install probe assembly (7).
Secure with camlock levers (4).
Secure with camlock levers (1).
(1)
Refer to Figure 4-20 and pull upon camlock levers and remove dust plug and dust cap.
(2)
Position adapter (2) on fitter/separator (3) outlet fitting. Secure by pushing down on camlock le-
vers.
(3)
Install suction hose (1) and secure by pushing down on camlock levers.
4-33
|
