|
| |
TM 10-4930-238-12&P
4-21. ADAPTER, WATER DETECTOR - Continued.
b. Inspect ion.
(1) Inspect adapter for leaks.
(2) Inspect adapter for missing or damaged dust plugs or caps.
(3)
Inspect adapter for a damaged probe assembly.
c. Cleaning.
Cleaning solvent is toxic and flammable. Use only in a well-ventilated area.
Avoid prolonged breathing of fumes. Keep solvent away from flames. Do not
use in excessive amounts. Avoid skin contact.
(1) Clean adapter with cleaning solvent.
(2) Allow to dry.
d. Repair. Repair is limited to replacing defective parts.
e.
Disasse mbly. (Refer to Figure 4-21.)
(1) Pull upon camlock levers (1) and remove dust plug (2) and gasket (3). Discard gasket.
(2) Pull upon camlock levers (4) and remove dust cap (5) and gasket (6). Discard gasket.
(3) Remove probe assembly (7) from nipple (10).
(4) Remove coupling half (8) and coupling half (9) from nipple (10).
4-32
|
