|
| |
TM 10-4930-238-12&P
a. Removal. (Refer to Figure 4-18.)
(1) Pull upon camlock levers and remove two discharge hose assemblies (1).
(2) Pull upon camlock levers on wye fitting (2) and remove wye fitting (2) from suction hose assem-
blies (3).
Figure 4-18. Wye Fitting Assembly, Removal/Installation.
b. Cleaning.
Cleaning solvent is toxic and flammable. Use only in a well-ventilated area.
Avoid prolonged breathing of fumes. Keep solvent away from flames. Do not
use in excessive amounts. Avoid skin contact.
(1) Clean wye fitting assembly with cleaning solvent.
(2) Allow to dry.
c.
Inspection.
(1) Inspect wye fitting assembly for missing dust caps or dust plug.
(2) Inspect wye fitting assembly for damaged or missing camlock levers.
d. Repair. Repair is limited to replacing defective parts.
4-29
|
