|
| |
TM 10-4930-238-12&P
4-19. FRAME ASSEMBLY - Continued.
b. Repair.
(1)
If container (2) is damaged, remove twenty-eight screws (3), fourteen loops (4) and remove con-
tainer (2). Position new container (2) on frame and secure with fourteen loops (4) and twenty-
eight screws (3).
(2)
If any straps (5) or (6) are damaged, remove two screws (3), loops (4), and remove damaged
straps (5) or (6). Position new strap (5) or (6) on frame and secure with loop (4) and two screws
(3).
(3)
Repair frame (1) by straightening or painting frame. Refer to TM 43-0139 for painting.
c.
Installation.
(1)
Refer to Figure 4-17 and install contents in container (2).
(2)
Install discharge hose on frame (1).
4-20. WYE FITTING ASSEMBLY.
This task consists of:
a. Removal
b. Cleaning
c. Inspection
d. Repair
e. Disassembly
f. Reassembly
g. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanic’s, Appendix B , Item 3
Materials Requ ired:
Cleaning Solvent (Item 1, Appendix E)
Cloth, Lint-Free (Item 3, Appendix E)
Gaskets, P/N MS27030-6
Equipment Conditions:
Forward Area Refueling Equipment shutdown per para. 2-8 b.
Genera I Safety Instructions:
Do not smoke or use an open flame in vicinity of the Forward Area Refueling
Equipment. Failure to comply may result in personnel injury.
4–28
|
