|
| |
TM 10-4930-238-12&P
4-17. ADAPTER ASSEMBLY.
This task consists of:
a. Removal
b. Cleaning
c. Inspection
d. Repair
e. Disassembly
f.
Reassembly
g. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanic’s, Appendix B , Item 3
Materials Required:
Cleaning Solvent (Item 1, Appendix E)
Cloth, Lint-Free (Item 3, Appendix E)
Gasket, P/N MS27030-6 (2”)
Gasket, P/N MS27030-8 (3”)
Gasket, P/N MS27030-9 (4”)
Equipment Co nditions:
Forward Area Refueling Equipment shutdown per para. 2-8 b.
Ge neral Safety Instructions:
Do not smoke or use an open flame in vicinity of the Forward Area Refueling
Equipment. Failure to comply may result in personnel injury.
a.
Removal. (Refer to Figure 4-14.)
(1)
Pull upon suction hose (1) camlock levers.
(2)
Remove adapter assembly (2) and install dust plug and dust cap.
Figure 4-14. Adapter Assembly, Removal/Installation.
4–23
|
