|
| |
TM 10-4930-238-12&P
4-16. VALVE, ELBOW COUPLER - Continued.
e.
Disassembly (Refer to Figure 4-13.)
(1)
Remove nut (1) and handwheel (2).
(2) Remove nut (3), gland (4), and packing (5) from body (9). Discard packing.
(3) Remove pin (6), stem (7), and two gaskets (8) from body (9). Discard gaskets.
Figure 4–13. Elbow Coupler Valve, Disassembly/Reassembly.
f. Reassemble.
(1) Refer to Figure 4-13 and install two gaskets (8) in body (9).
(2) Install stem (7) and pin (6).
(3) Install packing (5), gland (4), and nut (3).
(4) Install handwheel (2) and secure with nut (1).
g.
Installation.
(1)
Refer to Figure 4-12 and position valve (1) on fuel drum (2) and adapter (3).
(2) Secure valve (1) to fuel drum (2) and adapter (3) by pushing down on camlock levers.
4–22
|
