|
| |
TM 10-4930-229-12&P
4-19. Adapter, Water Detector Kit (cont)
b. Replace. (figure 4-14)
(1) Removal.
(a) Pull upon suction hose camlock levers and remove hose assembly (1).
(b) Pull upon adapter camlock levers and remove adapter (2) from filter/separator (3).
(2) Installation.
(a) Pull upon camlock levers and remove dust plug and dust cap.
(b) Position adapter (2) on filter/separator (3) outlet fitting. Secure by pushing down on camlock levers.
(c) Install suction hose (1) and secure by pushing down on camlock levers.
Figure 4-14. Water Detector Kit Adapter, Removal/Installation.
4-32
|
