|
| |
TM 10-4930-229-12&P
4-20. Frame Assembly.
This task covers:
a. Repair
b. Replace
INITIAL SETUP
Tools:
Tool Kit, General Mechanic’s, Item 1, Section Ill,
Appendix B
Equipment Conditions:
FARE shutdown, para. 2-12
General Safety Instructions:
WARNING
. Do not smoke or use an open flame in the
vicinity of the FARE, failure to comply may
result in personnel injury.
. Drain any fuel into suitable container. Clean up
any fuel spills to prevent fire or environmental
hazard.
a. Repair. (figure 4-15)
(1)
(2)
(3)
(4)
(5)
Inspect frame for crack, damaged or missing parts.
WARNING
Cleaning solvent, Federal Specification PD-680, is toxic and flammable.
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent
flames. Do not use in excessive amounts. Avoid skin contact.
NOTE
Do not apply solvent to container.
Clean frame with cleaning solvent, allow to dry.
Use only in a
away from
If container (2) is damaged, remove twenty-eight screws (3), fourteen loops (4) and remove container
(2). Position new container (2) on frame (1) and secure with fourteen loops (4) and twenty-eight
screws (3).
If any straps (5 or 6) are damaged, remove two screws (3) and one loop (4) per strap.
damaged strap(s). Position new strap(s) (5 or 6) on frame (1) and secure with loop (4)
(3) per strap.
Repair frame (1) by straightening or painting frame. Refer to TM 43-0139 for painting.
Remove
and two screws
b. Replace. (figure 4-15)
(1) Removal.
(a) Remove discharge hoses from frame (1).
4-33
|
