|
| |
TM10-4330-235-13&P
CHAPTER 4
UNIT MAINTENANCE
Section I. Repair Parts and Special Tools List
4-1. COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50-970, or CTA 8-100, as applicable to your unit.
4-2. SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
No special tools and equipment are required for maintenance of the filter/separator.
4-3. REPAIR PARTS
Repair parts are listed and illustrated in Appendix C of this manual.
Section Il. Service Upon Receipt of Materiel
4-4. INSPECTION
a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report
the damage on SF 364, Report of Discrepancies.
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies
a.
b.
c.
in accordance with the instructions of DA PAM 738-750.
Section Ill. Preventive Maintenance Checks and Services (PMCS)
General. A PMCS table, Table 4-1, has been provided so you can keep your equipment in good operating
condition and ready for its primary mission.
Warnings and Cautions. Always observe the WARNINGS and CAUTIONS appearing in the PMCS table.
Warnings and cautions appear before the procedure to which they apply. You must observe these
WARNINGS and CAUTIONS to prevent serious injury to yourself and others or prevent damage to your
equipment.
Explanation of Columns,
(1)
(2)
(3)
Item No. Numbers in this column are for reference. When completing DA Form 2404 (Equipment
Inspection and Maintenance Worksheet), include the item number for the check/service indicating a
fault. Item numbers also appear in the order that you must do checks and services for the intervals
listed.
Interval. This column tells you when you must do the procedure in the procedure column.
Item to Check/Service. This column lists the name of the item to be checked or serviced.
4-1
|
