|
| |
TM 10-4320-351-14
b.
Installation.
(1)
Install the control box (6) on the accessory module with four cross tip screws (4) and washers (5).
(2)
Open center cover (1).
(3)
Remove dust caps from control cable (2) and connector, and install control cable W201 to control box
connector. Connect dust caps together.
(4)
Remove dust caps from battery cable (3) and connector, and install control cable W202 to control box
connector. Connect dust caps together.
(4)
Close and latch center cover.
Figure 4-25. Control Box Replacement
4-47
|
