|
| |
TM 10-4320-324-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Service (PMCS - CONT)
NOTE: Within designated interval, these checks are to be performed in the order listed.
B - Before
D - During
A - After
W - Weekly
M - Monthly
Interval
Procedure
Equipment Is
Item
Item To Be
Check for and have repaired
Not Ready/
No
B
D A
W
M
Inspected
or adjust as necessary
Available If:
13
Controls Panel
Inspect for damage, secure
Damage to indicators and
Instruments and
mounting and proper operation of
internal components.
Switches
controls and instruments. Check to
Switches are loose, or
ensure all instruments are working
damaged. Gauges cannot
properly.
be read.
14
Throttle control
Inspect for bent, loose, or damaged
Throttle control inoperative.
control mechanism.
15
Main Wiring
Inspect for frayed or worn spots in
If wiring excessively frayed,
Harness
wiring harness. Check for loose
worn, or deteriorated.
connections.
16
Tires
Check for proper inflation, 40 PSI
(2.8 kg/cm2). Check tires for proper
wear; no less than 1/8 in tread. Be
sure tires are not excessively worn.
Check for cuts, cracks, uneven
wear.
17
Wheel
Check for damaged wheels. Check
that lug nuts on wheels are securely
tightened. Check that bearing caps
are properly seated and tight.
18
Frame Assembly
Visually inspect all structural parts
for excessive wear, corrosion,
broken welds, security, cracks,
damaged landing leg assemblies,
and damaged towbar.
*19
Pump
Drain water if ambient
Bearing housing mounting
temperature is expected to fall to
hardware is loose. Class III
32°F (0°C) or below.
leaks or excessive noise are
present.
20
Batteries and
Check electrolyte level. Check for
Battery is too weak to crank
Cables
corrosion buildup at post.
engine.
*Applicable to Model 13229E8401 (97403).
2-8
|
