|
| |
TM 10-4320-324-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Service (PMCS - CONT)
NOTE: Within designated interval, these checks are to be performed in the order listed.
B - Before
D - During
A - After
W - Weekly
M - Monthly
Interval
Procedure
Equipment Is
Item
Item To Be
Check for and have repaired
Not Ready/
No
B
D A
W
M
Inspected
or adjusted as necessary
Available If:
6
Engine Oil
Check oil level after every 10 hours
If any class III oil leaks are
of operation. If engine oil level is
present.
on or below the lower mark, add
oil. Change oil as required.
7
V-Belts
Check for loose v-belt. Check for
cracks or otherwise damaged v-belt.
Check warning device for correct
function after at least every 100
hours of operation.
8
Fuel Lines and
Visually inspect unit for fuel leaks,
Leaks are present.
Hoses
breaks, cracks and loose fittings.
9
Oil Lines
Visually inspect unit for oil leaks.
Class III leaks are present.
10
Fuel Tank,
Check fuel tank fitting, lines, drain
Leaks are present.
Fittings, and
plug and all tank surfaces for leaks
Gauge
or any other damage. Check tank
retaining straps for security. Check
fuel level gauge for damage. Check
for clogged strainer, clean
as required.
11
Air cleaner
Check service indicator before and
after each operation for red signal
indicating that elements require
replacement. If signal shows,
replace elements in accordance
with paragraph 3-5. Inspect for
bent, cracked, or damaged air
cleaner.
12
Alternator
Check that alternator and all
Evidence of arcing
electrical connections are secure
overheating, binding, or
and no broken wires are present.
cracking and alternator light
stays on at start-up or
during operations
2-7
|
