|
| |
TM 10-4320-316-14
4-22. ENCLOSURE ASSEMBLY, INLET SIDE REPAIR AND REPLACEMENT.
This Task Covers:
a.
Removal
b.
Disassembly
c.
Cleaning
d.
Repair
e.
Assembly
f.
Installation
Initial Setup:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Drill, Hand Portable (Appendix B, Item 2)
Bit, Drill, .125 in. dia. (Appendix B, Item 2)
Riveter, Blind, Hand (Appendix B, Item 5)
Shears, Bent, Trimmers (Appendix B, Item 2)
Materials Required
Cloth, Lint-Free (Appendix E, Item 1)
Brush, Medium Bristle (Appendix E, Item 2)
Solvent, Dry Cleaning (Appendix E, Item 3)
Equipment Condition
DED pump assembly shut down and cool.
NOTE
If inlet enclosure assembly is being removed for maintenance access only, do
not remove roll-over frames.
Roll-over frame removed (see paragraph 4-13).
Access cover removed (see paragraph 4-18).
a. Removal. (Refer to Figure 4-11).
(1) Remove twenty-one screws (1).
(2) Remove inlet enclosure assembly (2) from unit.
4-38
|
