|
| |
TM 9-2330-398-24
3-4. EMERGENCY VALVE REPAIR (continued).
4.
Install disc holder (16), plunger disc (17), retaining plate (18), washer (19), and nut (30) on stem (32).
5.
Install spring (31) on stem (32).
6.
Install bonnet (33) on body (20) with three screws (21).
7.
Install adapter (14) on bonnet (33), and tighten setscrew (15).
e. INSTALLATION
1.
Install emergency valve (3), pipe (2), and adapter (1) on tank sump (8) with eight nuts (5).
2.
Install new gasket (9) and coupling (13) on emergency valve (3) and outlet pipe (11) with two bolts (12) and nuts
(10).
3.
Install emergency valve cable (6) on emergency valve (3), and tighten two nuts (7) on emergency valve lever U-
bolt (4).
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
3-123
|
