|
| |
TM 9-2330-398-24
3-39. HOSE REEL PIPING ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to
TM 9-2330-398-10).
Materials/Parts
• Fuel drained from piping (refer to TM 9-2330-9-10).
• Gasket (Item 54, Appendix F)
• Semitrailer bonded and grounded (refer to
• Seal (Item 149, Appendix F)
TM 9-2330-398-10).
NOTE
Use
this
task
to
replace left-side and
right-side
hose
reel
piping
assembly.
Right side is shown.
a. REMOVAL
1. Remove pipe plug (5) from hose reel piping
assembly (6), if necessary.
2. Remove two screws (4) and nuts (10), pipe
coupling (3), and seal (2) from piping assembly
(6). Discard seal.
3. Remove four nuts (7), piping assembly (6), and
gasket (9) from volumetric meter (8). Discard
gasket.
b. INSTALLATION
1. Install new gasket (9) and piping assembly (6)
on volumetric meter (8) with four nuts (7).
2. Install pipe coupling (3) and new seal (2) on
piping assembly (6). Install piping assembly (6)
on hose reel (1) with two screws (4) and nuts
(10).
3. Install pipe plug (5) in piping assembly (6), if
necessary.
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
3-117
|
