|
| |
TM 9-2330-398-24
3-37. GLOBE VALVE REPAIR (continued).
c. CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective
goggles and gloves, and use In a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe vapors. Do not use near open flame or
excessive heat.
1.
Clean all metal parts with drycleaning solvent and rags.
2.
Inspect metal parts for cracks, scoring, and pitting. Replace any damaged parts.
d. ASSEMBLY
Install seat (4) new packing (5), stem (6), insert (7), sleeve (8), nipple (9), nut (10), handwheel (12), and packing
nut (11) in globe valve (3). Tighten packing nut (11) and turn handwheel (12) clockwise.
e. INSTALLATION
Install pipe nipple (2) and globe valve (3) on manifold (1).Turn globe valve (3) clockwise to tighten.
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
3-115
|
