|
| |
TM 9-2330-398-24
3-34. 4-NCH PUMP ASSEMBLY REPAIR (continued).
a. REMOVAL
1.
Remove four screws (3), self-locking nuts (4), from firewall sections (1). Discard self-locking nuts.
NOTE
Remove altemator ground wire from bottom center of firewall.
2.
Remove four screws (5), self-locking nuts (6), two clamps (7) and one spacer from firewall sections from engine
cabinet assembly (2). Discard self-locking nuts.
3.
Remove eight screws (8), and self-locking nuts (9), from engine frame (1). Discard self-locking nuts.
4.
Remove four screws (10), washers (11), and self-locking nuts (12) from engine frame (1). Remove engine
support (13). Discard self-locking nuts.
3-103
|
