|
| |
TM 9-2330-398-24
3-26.
ENGINE SHROUDING REPLACEMENT.
2.
Remove screw (21), lockwasher (22), and spacer (23) from top air housing cover (12). Discard lockwasher.
3.
Remove two screws (17), washers (18), vibration cushions (19), and spacers (20) and lifting bracket (15), with brace
(26) attached, from engine.
4.
Remove four screws (14) and washers (13), two spring nuts (38), and top air housing cover (12) from engine.
b.
BLOWER HOUSING REMOVAL
NOTE
To remove blower housing only, top air housing cover need not be removed, just loosened.
1.
Remove four screws (4), washers (6), and self-locking nuts (5) and engine fan shroud (7) from frame (8) and support
(3). Discard self-locking nuts.
2.
Loosen screw (29), but do not remove.
3.
Remove screw (30), lockwasher (31), washer (32), and grille retainer (33) and blower housing grille (34) from blower
housing (35). Discard lockwashers.
4.
Remove six screws (37) lockwashers (36), two screws (27) and washers (28), screw (29), and blower housing (35)
from engine (1). Discard lockwashers.
3-79
|
