|
| |
TM 9-2330-398-24
3-23. ENGINE THROTTLE AND CHOKE LINKAGE REPLACEMENT (.continued).
2.
Remove cotter pin (8) and clevis pin (6) from end of throttle cable clevis (9), Disconnect clevis (9) from throttle
linkage (7). Discard cotter pin.
3.
Remove jamnut (5) and clevis (9) from end of throttle cable (4).
4.
Remove two cotter pins (11) and washers (10) from end of throttle linkage (7). Remove throttle linkage (7) from
lever (12). Discard cotter pins.
3-70
|
