|
| |
TM 9-2330-398-24
3-19. ENGINE OIL COOLER, LINES, AND FITTINGS REPLACEMENT (continued).
b. INSTALLATION
CAUTION
Take care not to bend or damage aluminum cooling fins when Installing engine oil cooler.
1.
Install engine oil cooler (5) on mounting plate (7) with six screws (6), new lockwashers (8), and nuts (9).
2.
Install two new self-locking screws (10) and mounting plate (7) on engine.
3.
Install two oil cooler lines (3 and 4) on engine oil
cooler (5).
4.
Install two oil cooler lines (3 and 4) on oil filter
adapter (11).
5.
Install two retaining clips (2) on two oil cooler
lines (3 and 4) with new self-locking screw (1).
FOLLOW-ON MAINTENANCE:
• Fill engine with oil (Appendix G).
• Install blower housing m(pa 3-26).
• Disconnect ground (refer to TM 9-2330-398-10).
• Connect negative battery cable (para 2-33).
• Install engine and pump cabinet frame (para 3-16).
• Install engine fuel lines (para 2-98).
• Install muffler shroud (para 2-99).
• Tighten top air housing cover (para 3-26).
• Install engine door panel (para 2-99).
3-57
|
