|
| |
TM 9-2330-398-24
3-6. SPECIFIC PROCEDURES (continued).
g.
CLEANING AFTER SHOP INSPECTION
WARNING
Compressed air used for drying or cleaning purposes mug not
exceed 30 pal (207 kPa). Wear protective clothing (goggles and
gloves) and use caution to avoid Injury to personnel.
After in-process shop inspection, dip parts in a tank containing corrosion preventive (Item 11, Appendix C).
Remove parts (with rubber gloves), and dry thoroughly with compressed air or by wiping with clean, lint-free cloths
(Item 25, Appendix C). Apply preservatives as soon as possible after cleaning.
h.
LUBRICATION
Refer to PMCS and Appendix G for lubrication instructions.
3-7. PNEUMATIC LEAKAGE TEST.
A pneumatic leakage test s to be performed at least annually. For procedures, contact:
Commander
U.S. Tank-automotive and Armaments Command
ATTN: AMSTA-IM-MTT
Warren, MI 48397-5000
3-29
|
