|
| |
TM 9-2350-253-34-2
2-90. HAZARDOUS MATERIALS PLACARD AND BRACKET REPLACEMENT (continued).
4.
Remove six screws (13), washers (14), and self-locking nuts (15) and bracket (4) from curb side of semitrailer.
Discard self-locking nuts.
5.
Remove six self-locking nuts (17) and washers (16), support (i19), plate (18), and bracket (4) from road side
of semitrailer. Discard self-locking nuts.
b.
INSTALLATION
1.
Install bracket (4), plate (18), and support (19) on road side of semitrailer with six new self-locking nuts (16)
and washers (17).
2.
Install bracket (4) on curb-side of semitrailer with six screws (13), washers (14), and new self-locking nuts
(15).
3.
Install bracket (4) on rear of semitrailer with four screws (10), washers (11), and new self-locking nuts (12).
4.
Install hazardous materials placard (3) on support (8) with four screws (9), eight washers (7), and four new
self-locking nuts (6).
5.
Install hazardous materials placard (3) on bracket (4) with four screws (1), eight washers (2), and four new
self-locking nuts (5).
2-192
|
