|
| |
TM 9-2330-398-24
2-57. AIR LINE TUBING AND FITTINGS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Test
Initial Setup:
Tools Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
• Semitrailer bonded and grounded (refer to TM 9-
Material/Parts:
2330-398-10).
• Antiseize tape (Item 30, Appendix C)
• Sealing compound (Item 27, Appendix C)
a. REMOVAL
NOTE
All air line tubing is replaced the same way. Only the number of clips varies.
1. Disconnect air line tubing (3) from fitting (6) and remove insert (5), compression sleeve (8), and nut (4) from both
ends of air line tubing (3).
2. Release clips (2) and pull air line tubing (3) through grommets (1).
3. Remove fitting (6) from air reservoir (7).
2-142
|
