|
| |
TM 9-2330-398-24
2-34.
FRONT BLACKOUT MARKER LIGHTS WIRING HARNESS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Inspection
c.
Installation
Initial Setup:
Tools/Test Equipment
Equipment Conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
Semitrailer bonded and grounded (refer to
Materials/Parts:
TM 9-2330-398-10).
• Gasket (2) (Item 43, Appendix F)
• Road-side composite light cover plate removed
• Gasket (Item 45, Appendix F)
(para 2-30).
• Lockwasher (6) (Item 94, Appendix F)
a.
REMOVAL
NOTE
Front blackout marker light boxes are located on curb side and road side of semitrailer. Removal
of access cover is the same for both boxes; road-side light box is shown.
1. Remove six screws (5) and lockwashers (6), access cover (7), and gasket (8) from semitrailer access hole (9).
Discard gasket and lockwashers.
2. Remove 16 screws (4) and two cover plates (3) and gaskets (2) from curb-side and road-side blackout marker
light boxes (1). Discard gaskets.
2-82
|
