|
| |
TM 9-2330-398-24
2-33.
BATTERY CABLE REPLACEMENT (continued).
b.
INSTALLATION
1.
Install lead (6), wiring harness (7), and wiring harness (13) on terminal (9) with fastener (8).
2.
Connect opposite end of lead (6) to alternator.
3.
Connect opposite end of wiring harness (7) to junction box solenoid.
4.
Connect opposite end of wiring harness (13) to junction box circuit breaker.
5.
Install lead (18) on terminal (17) with fastener (16), and connect opposite end of lead (18) to engine ground.
6.
Connect lead (1) to starter (20), and install opposite end of lead (1) on terminal (10) with fastener (2).
7.
Install lead (4) on terminal (10) with fastener (3).
8.
Install lead (4) on terminal (9) with fastener (5).
9.
Install lead (14) on terminal (17) with fastener (15).
10.
Install two leads (14 and 19) on terminal (11) with fastener (12).
11.
Connect opposite end of lead (19) to semitrailer ground.
FOLLOW-ON MAINTENANCE:
• Install negative and positive battery terminals and battery cover (para 2-32).
2-81
|
