|
| |
TM 9-2330-272-14
5-9.
CABINET DOOR MAINTENANCE (Con’t).
a.
REMOVAL
1.
Grind off tack welds that secure hinge (4) to cabinet (1).
2.
Remove ten locknuts (2), screws (5), and cabinet door (3) with hinge (4) from cabinet (1). Discard locknuts.
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent’s flash point is 100°F-138°F (38°C-59°C). If you become dizzy while
using cleaning solvent, Immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes and get medical aid.
1.
Clean all parts with dry cleaning solvent.
2.
Inspect cabinet door and hinge for bends and cracks. Straighten bends if possible.
TA702862
5-22
|
