|
| |
TM 9-2330-272-14
5-2.
BRAKESHOE REPAIR (Con’t).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent’s flash point Is 100°F-138°F (38°C-59°C). If you become dizzy while
using cleaning solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes and get medical aid.
1.
Clean brakeshoes (2) with dry cleaning solvent
and a wire brush. Allow to air dry.
2.
Inspect brakeshoes (2) for cracks and breaks.
Replace brakeshoes if cracked or broken.
WARNING
If brakeshoe Iining is replaced, replace all brakeshoe linings on that axle. Combination
of old brakeshoes with new will cause uneven braking. Accidents causing serious
Injury or death to personnel or damage to equipment may result.
Install brakeshoe linings (1) on brakeshoes (2) with 16 new rivets (3).
FOLLOW-ON TASKS:
Install brakeshoes (para 4-30).
Adjust service brakes (para 4-31).
TA702851
5-4
|
