|
| |
TM 9-2330-272-14
Section Il. BRAKE SYSTEM MAINTENANCE
5-2.
BRAKESHOE REPAIR.
This Task Covers:
a.
Disassembly
c. Assembly
b.
Cleaning and Inspection
Initial
Setup:
Equipment Conditions:
MateriaIs/Parts:
Brakeshoes removed (para 4-30).
Wire brush (Item 4, Appendix E)
Tools/Test Equipment:
Dry cleaning solvent (Item 16, Appendix E)
Field automotive shop set
Brake lining repair kit
Brake and clutch reliner
WARNING
DO NOT handIe brakeshoes, brakedrums, or other brake components unless area has
been properly cleaned. There may be asbestos dust on these components which can
be dangerous if you touch it or breathe it. Wear an approved filter mask and gloves.
Never use compressed air or a dry brush to clean brake components. Dust may be
removed using an industrial-type vacuum cleaner. Clean dust or mud away from brake
components with water and a wet, soft brush or cloth. Failure to follow this warning may
result in serious illness or death to personnel.
Remove 16 rivets (3) and brakeshoe linings (1)
from brakeshoes (2). Discard rivets and linings.
5-3
|
