|
| |
TM 9-2330-272-14
4-101. FLOW SELECTOR VALVE REPLACEMENT (M131A4C AND M131A5C EARLY
MODEL).
This Task Covers: Replacement
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Tank purged (para 4-64).
• General mechanic’s tool kit
• Common no. 1 shop set
NOTE
Use this procedure to remove and install flow selector valve to gain access to other
components. If flow selector valve is unserviceable, it must be replaced with a late
model flow selector valve. Notify Direct Support Maintenance.
1.
Disconnect two tubes (5) from elbows (4) and
remove elbows from flow selector valve (2).
NOTE
Screws are provided with replacement valve.
2.
Remove three screws (1) and flow selector valve (2) from bracket (3).
3.
Install flow selector valve (2) on bracket (3) with three screws (1).
4.
Install two elbows (4) on flow selector valve (2) and connect two tubes (5) to elbows
TA702842
4-221
|
