|
| |
TM 9-2330-272-14
4-50. LANDING GEAR LEG REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Install shaft (11) on gearbox output shaft (10) of other landing gear leg with screw (24) and new locknut (19).
2.
Position landing gear leg (9) on frame (1) with gearbox output shaft (10) installed into shaft (11).
3.
Position shoe (21) on landing gear leg (9). Install landing gear Ieg on tube (22) with screw (23) and new locknut
(20).
4.
Manually turn gearbox output shaft (10) until landing gear leg (9) is same height as other landing gear leg.
5.
Install Ianding gear leg (9) on frame (1) with seven screws (2), new Iockwashers (3), and nuts (4). Do not fully
tighten nuts.
6.
Install screw (24) and new locknut (19) into shaft (11) and gearbox output shaft (10).
7.
Install brace (18) on frame (1) and landing gear leg (9) with two screws (17), new Iockwashers (26), and nuts (25).
TA702753
4-99
|
