|
| |
TM 9-2330-272-14
4-50. LANDING GEAR LEG REPLACEMENT (Con’t).
4.
Remove two locknuts (19), and screws (24) from shaft (11) and gearbox output shafts (10). Discard locknuts.
5.
Remove nut (15), Iockwasher (14), and screw (12) from rod (27) and crossmember. Discard Iockwasher.
6.
Remove screw (29), Iockwasher (28), and rod (27) from landing gear leg (9). Discard Iockwasher.
7.
If damaged, remove clevis (13) and nut (16) from rod (27).
8.
Remove two nuts (25), lockwashers (26), screws (17), and brace (18) from landing gear leg (9) and frame (1).
Discard Iockwashers.
9.
Remove locknut (20), screw (23), and tube (22) from landing gear leg (9) and shoe (21). Discard locknut.
10.
Remove seven nuts (4), Iockwashers (3), and screws (2) from landing gear leg (9) and frame (1). Pull outward
and remove landing gear Ieg from frame. Remove shaft (11) from gearbox output shaft (10) on other landing gear
leg. Discard Iockwashers.
TA702752
4-98
|
