|
| |
TM 55-2915-335-30&P
2-25. FUEL BOOST PUMP / CARTRIDGE - FINAL TEST (Cont)
2-25
(6)
(7)
Screw cartridge pulling tool (23) (Appendix
D) into drain port. Slide hammer of pulling
tool against bolt head to remove cartridge
from pump housing. Unscrew pulling tool
from cartridge.
Remove cartridge (1) from pump housing (2).
Some leakage from pump housing may occur.
If pump housing does not leak a steady flow of
fluid, the housing is acceptable. A steady flow
of fluid leaking from the housing indicates a
defect in the pump housing.
NOTE
Upon successful completion of this test the boost pump is fully
qualified to be returned to service.
END OF TASK
2-101
|
