|
| |
TM 5-4930-237-10
Table 3-1. Troubleshooting - Continued
Malfunction
Test or Inspection
Corrective Action
SWIVELADAPTER
1. LEAKAGE PROM END.
Step 1.
Disconnect adapter from 2 inch discharge hose (11). Inspect inside for dust seal.
Inspect dust seal for cuts, tears, or distortion.
If dust seal is damaged or distorted install new dust seal.
Step 2.
Inspect boot for cuts, tears, or distortion.
If boot is missing or damaged, replace swivel adapter.
2. SEXLESS COMPONENTS WILL NOT LOCK TOGETHER.
Disconnect parts. Check interlock pin(s) for damage, distortion, or missing parts.
If interlock pin is damaged or missing parts, replace swivel adapter.
3. DUST CAP DAMAGED OR MISSING.
Inspect dust cap for cracks or distortion.
If dust cap is missing or damaged, replace swivel adapter.
CCR NOZZLE - Refer to TM5-4930-235-13&P for details.
3-8
Change 5
|
