|
| |
TM5-4930-235-13&P
Figure 5-9. Stem Guide Installation
CAUTION
Do not use an extension or cheater bar with piston torque tool. Failure to comply can result in
damage to parts.
(28) Slide piston (9) into stem guide (22) and thread on end of stem (21). Tighten piston (9) using piston
torque tool.
(29) Remove stem tool as follows:
(a) Put handle (11) in no flow (off) position.
(b) Push up on pullback sleeve (27) while holding stem tool until latches (25) release stem tool.
(c) Pull stem tool out of nozzle body (47).
(d) Put handle (11) in FLOW (on) position.
(30) Place spring (4) on end of piston (9).
5-20
|
