|
| |
TM5-4930-235-13&P
Figure 5-7. Latch Adapter Removal
(24) Remove snap ring (39), washer (40), seal (41), and o-ring (42) from nozzle body (47).
(25) Remove hinge bushings (43) from nozzle body (47).
(26) Remove nozzle body (47) from vise.
CAUTION
Do not remove spring pin or ID plate from nozzle body unless inspection indicates replacement
is required. Damage to nozzle body can result.
(27) Remove spring pin (44) from nozzle body (47).
(28) Remove rivets (46) and ID plate (45) from nozzle body (47).
NOTE
Do not remove strainer housing from nozzle body unless inspection indicates parts require
replacement.
5-12
|
