|
| |
TM5-4930-235-13&P
Figure 5-5. Pressing Release Pins
(17) Remove nose sleeve (24, Figure 5-2) from pullback sleeve (27) using spanner wrench. (See Figure 5-
6.)
(18) Remove latches (25, Figure 5-2) and endless spring (26) as follows:
(a) Push down on pullback sleeve (27) until release pins (29) engage.
(b) Lift endless spring (26) out of groove of one latch (25). Pull latch (25) up and out of groove.
(c) Repeat step (b) to remove all but one latch (25).
(d) Remove final latch (25) and endless spring (26).
(19) Remove pullback sleeve (27) and related parts as follows:
(a) Push down on pullback sleeve (27) until it stops. Hold down release pins (29) and let pullback
sleeve (27) slide up.
WARNING
Pullback sleeve is under spring tension. Remove slowly to prevent parts from flying out. Failure
to comply can result in personal injury.
(b) Slide pullback sleeve (27) from nozzle body (47) slowly to relieve spring tension. Remove carefully,
ball bearings (30) and springs (31) may drop out.
5-10
|
