|
| |
TM5-4930-235-13&P
(2)
Place handle (13) on fuel hose couplings half (12) in the off position.
(3)
Pull ring on nozzle coupling (9) toward the nozzle (3) and turn the nozzle clockwise to remove from
fuel hose (14).
(4)
Remove seals (10) from inside coupling (9).
b.
Inspection. (Cam-Lock)
(1)
Inspect gasket (4) for cuts, tears, or distortion.
(2)
Gasket (4) shall be replaced if damage is found.
b.1.
Inspection, (Unisex model-125-0505).
Inspect seals (10) on coupling and dust plug for cuts, tears, or distortion.
c.
Installation (Cam-Lock).
(1)
Put gasket (4) inside coupling half (2).
(2)
Insert fuel hose in nozzle (3).
(3)
Push cam arms (1) inward toward coupling half (2) to secure fuel hose.
d.
Replacement (Unisex model-125-0505).
Replace seals (10) if damaged.
e.
Reassembly (Unisex model- 125-0505).
(1)
Place seals (10) inside coupling (12) and dust plug (11).
(2)
Connect nozzle (3) to fuel hose coupling (12) and turn counterclockwise to lock in place.
(3)
Turn handle (13) to flow position.
3-2.1/(3-2.2 blank)
|
