|
| |
TM5-4930-235-13&P
2-6.1 Disconnection of Nozzle. (Unisex model-125-0505.) (See Figure 2-2.1).
NOTE
A suitable container should be available to catch fuel spillage.
a.
Turn handle (15) on full hose (4) coupling half (2) to no flow position.
b.
Pull ring (1) on nozzle coupling half (2). Turn nozzle (10) clockwise and remove from full hose (4). Release
ring (1).
c.
Install dust plug (3) on coupling half (2) and turn clockwise to lock in place.
Section IV. OPERATION UNDER UNUSUAL CONDITIONS.
2-7. Operation Under Unusual Conditions. Operating instructions under usual conditions are acceptable; however,
the following items shall be observed:
a.
Operation in Unusual Weather. After use, the nozzle shall be wiped with a clean cloth (Item 1, Appendix
F) to remove dust, dirt, fuel moisture, snow, or mud. Store the nozzle in a place that will protect it from extreme
temperatures, moisture, dust, dirt, and mud.
b.
Outlet Cap Assembly and Dust Plug. The outlet cap assembly and dust plug shall be installed when
nozzle is not in use. Component parts shall not be installed dirty or wet.
Change 1
2-6
|
