|
| |
TM 5-4930-234-13&P
b.
Disassembly (See Figure 5-5).
1.
Remove o-ring (1) and seal (2) from unisex coupling.
2.
Remove ring (3), pin (4), and spring (5) from adapter (9).
3.
Place unisex coupling in vise with wire hole facing up.
4.
Remove sealant from wire hole.
5.
Bend up end of wire (6). Pull wire (6) out of body (7).
6.
Remove unisex coupling from vise.
7.
Twist body (7) and adapter (9) in opposite directions, then pull apart.
8.
Remove o-ring (8) from groove in adapter (9).
c.
Inspection.
NOTE
Wipe parts with a clean, lint-free cloth before inspection.
1.
Inspect body (7) for cracks, distortion, or corrosion. Inspect grooves for corrosion and cracks.
2.
Inspect adapter (9) for cracks, distortion, stripped threads, or corrosion.
12594A
Figure 5-5. Unisex Coupling Disassembly
5-9
|
