|
| |
TM 5-4930-234-13&P
3.
Pull strainer (3) out of nozzle (1).
b.
Inspection. Inspect strainer (3) for cracks, distortion, or damage to screen. Inspect o-ring (4) on coupling for
damage. Remove o-ring (4) if damaged.
c.
Replacement. Replace strainer (3) or o-ring (4) if damaged.
d.
Reassembly.
1.
Place strainer (3) inside nozzle (1).
2.
Thread coupling (2) into nozzle (1) and hand-tighten.
Figure 3-3. Strainer and O-ring Replacement
3-5/(3-6 Blank)
|
