|
| |
TM 5-4320-313-14
4-15. FUEL TANK.
This task consists of:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics (item 1, appendix B)
Allen Socket (item 24, appendix B)
Materials Required:
Solvent, Cleaning (item 10, appendix E)
Equipment Conditions:
Pumping assembly shut down in accordance with paragraph 2-6.
Fuel lines removed in accordance with paragraph 4-14.
a. Removal. (Refer to figure 4-8).
(1) Remove two screws (1), two nuts (2), four spacers (3), two spacers (4), and two screws
(5).
(2) Lift up on fuel tank (6) and remove. Replace fuel cap (7) if damaged.
b. Inspection.
(1) Inspect fuel tank for cracks or missing cap.
(2) Inspect all hardware for damaged threads.
c. Installation.
(1) Install fuel cap (7).
(2) Position fuel tank (6) on support.
(3) Install two spacers (4) and four spacers (3) and secure with two screws (5 and 1) and two
nuts (2).
4-20
|
