|
| |
TM 5-4320-313-14
(3) Install two spacers (16) and clamp (15) and secure with flat washer (14) and screw (13).
(4) Install spacer (12) and four clamps (11) and secure with two flat washers (8), two screws
(10), and screw (8).
(5) Install two washers (7), banjo fitting (6), and washer (5) and secure with bolt (4).
(6) Install hose (3), clamp (2), and hose (1).
Figure 4-7. Fuel Lines, Hoses, and Fittings Removal/Installation.
4-19
|
