|
| |
TM 5-4320-313-14
Table 2-2. Operator's Preventive Maintenance Checks and Services
B - Before
D -During
A - After
Equipment will be
INTERVAL
reported
ITEM
B
D
A
Item to be inspected/Procedure
not ready (red) if:
1 · • ·• • Inspect pump for leaks.
Class III leak.
2 · • · • Check engine oil level. If oil level is below
top mark on dipstick, add oil (item 6,
appendix E) to bring oil level to top mark on
dipstick.
3 • • • Check air filter indicator for red band in
window. Notify unit maintenance if red
band appears in air filter indicator.
4
•
Inspect muffler/spark arrestor. Notify unit
maintenance if muffler is glowing red hot.
5 • • • Inspect fuel system hoses and fittings for
Class III leak.
leaks.
6 •· • • Inspect engine for oil leaks.
Class III leak.
7 · ·• • ·• Inspect engine and pump for loose and
missing mounting hardware. Notify unit
maintenance if mounting hardware is loose
or missing.
8 •
• Inspect crank assembly for damage.
Section III. OPERATION UNDER USUAL CONDITIONS
Para.
Para.
Assembly and Preparation for Use
2-5
Operating Procedures
2-6
2-5. ASSEMBLY AND PREPARATION FOR USE.
These procedures consist of the following:
a. General Precautions.
(1) Do not operate the pumping assembly in an enclosed area.
Change 1 2-5
|
