|
| |
TM 5-4320-313-14
(6) Using timing cover oil seal auxiliary bushing, install new oil seal (12).
(7) Install shim (11), cam followers (10 and 9), and spindle (8).
(8) Install setscrew (7) and plastic plug (6).
(9) Position a new gasket (5) on crankcase.
NOTE
Make sure matchmarks on camshaft gear and crankshaft gears are aligned when installing timing cover.
(10)Install timing cover (4) on crankcase and secure with five washers (3), two screws (2), and four screws (1).
(11)Refer to paragraph 5-9 and install cylinder head.
(12)Refer to paragraph 5-8 and install cranking gears.
Figure 6-8. Timing Cover and Camshaft Reassembly.
6-13
|
