| |
TM 5-4320-308-13
2-2. OPERATING PROCEDURE (Continued)
c.
Starting.
CAUTION
If engine does not start on initial attempt, allow engine rotation to stop
completely before again engaging crank handle. Prime the pump.
Rotation of pump impeller without liquid in volute can reduce service life
of pump.
(1)
Engage crank handle (1) in gear housing (2).
(2)
With both hands, turn crank handle (1) clockwise with increasing speed.
(3)
When decompression lever (3) reaches 0 position, the highest possible speed must be obtained. Engine
will start and go to maximum operating speed. Extra fuel device button (4) will return to normal position by
itself.
(4)
Adjust throttle control hand lever (5) to desired speed.
2-8
|