| |
TM 5-4320-308-13
4-16. REPLACE CRANK ASSEMBLY GEARS
This task covers:
a.
Removal
c.
Assembly
b.
Cleaning/Inspection
INITIAL SETUP
Tools
General Safety Instructions
Shop set, automotive repair,
Well-ventilated area required.
field maintenance, basic
Materials/Parts
Diesel fuel oil (Item 2, Appendix E)
Grease (Item 3, Appendix E)
Grease (Item 4, Appendix E)
REMOVAL:
1
Remove four Allen screws (1) and remove housing (2).
2
Remove and discard gasket (3).
3
Remove needle shell (4), oil seal (5), gear wheel (6), and stud (7) as an assembly.
4
Remove needle shell (4), oil seal (5), and stud (7) from gear wheel (6).
5
Remove disc (8).
6
Remove hexagon nut (9) and spring washer (10).
7
Remove pinion (11).
4-36
|