|
| |
TM 5-4320-308-13
4-15. TEST/REPLACE/ADJUST INJECTION PUMP (Continued)
WARNING
Before starting the engine and after making repairs or adjustments on the fuel system, a 17
mm wrench must be available to allow rapid removal of the steel fuel line at the injection
pump in case of a runaway condition. Failure to heed this warning can result in injury to
personnel and equipment damage.
17
Install fuel filter, fuel hoses, and hose clamps as described in INSTALLATION steps 5, 6, 8, and 9 of paragraph 3-
25.
18
Remove fuel shutoff clamp 668 383 00 from fuel hose.
19
Install engine adapter housing.
4-35
|
