|
| |
TM 5-4320-306-24
44. REPAIR INJECTION PUMP (Continued)
55 Install protective sleeve KDEP 2874 on bearing cap (81)
56 Press bearing cap (81) from camshaft (82) using mechanical puller. Remove protective sleeve KDEP 2874.
57 Remove oil seal (83) from bearing cap (81). Discard oil seal.
58 Remove bearing cup (84) from end plate using bearing puller.
59 Remove bearing support (85) from camshaft.
60 Press bearing cone (86) from camshaft using mechanical puller.
61 Remove shims (87) and wire together to prevent loss. Remove intermediate ring (88)
62 Press bearing cone (89) from camshaft using mechanical puller.
63 Remove shims (90) and wire together to prevent loss. Remove intermediate ring (91).
4-12
|
