|
| |
TM 5-4320-306-24
3-13. REPLACE FUEL INJECTION PUMP (Continued)
Do not drop the gear mounting hardware into the crankcase.
6
Install one bolt (1), lockwasher (2), and washer (3).
7
Remove two screws (10) and two washers
(11).
8
Remove cover (12) and gasket (13) from
fuel injection pump (7).
9
Rotate crankshaft pulley until plunger for
cylinder number one (14) is at TDC.
Secure crankshaft pulley to hold in this
position.
10
Place gasket (13) and cover (12) onto fuel
injection pump (7).
11
Install two screws (10) and two washers
(11).
Do not drop the gear mounting hardware into the crankcase.
12
Remove bolt (1), lockwasher (2), and washer (3)
13
Rotate crankshaft until cylinder number one is at TDC Secure crankshaft to hold in this position
Do not drop the gear mounting hardware into the crankcase.
14
Install three bolts (1), three lockwashers (2), and three washers (3).
15
Release the crankshaft V-belt pulley.
ADJUSTMENT:
Adjust the fuel injection pump in accordance with paragraph 3-6.
3-64
|
